topic RE: Chrome 76 Update - BP no longer able to use HTML identification in Product Forum

Chrome 76 Update - BP no longer able to use HTML identification

SebastianBahri — Thu, 08 Aug 2019 11:58:00 GMT

Hello!

We have done several web application automations with Chrome before it updated to v 76 this week. And they have worked fine with all identification methods i.e. HTML / UIA etc.

Earlier versions of Chrome required to Disable a setting within "Chrome:Flags" called "Enable Network Service" in order for Chrome to function with BP. However in the latest Chrome update v. 76 this setting has entirely disappeared from the settings and BP is unable to identify, highlight or interact with elements using HTML identification that was earlier possible. Also note that UIA is currently working.

Any ideas how to get the updated Chrome 76 to work with HTML identification?

Thanks

------------------------------
Sebastian
Solutions Consultant
------------------------------

RE: Chrome 76 Update - BP no longer able to use HTML identification

GopalBhaire — Fri, 09 Aug 2019 06:36:00 GMT

I'm on Version 76.0.3809.100 had had no problem using Browser Mode for spying or identifying previously spied elements, I'm using BP 6.5 with chrome extension 2.0.0.1, can confirm chrome://flags/#network-service is no longer visible.

Close all the chrome process and run chrome.exe --force-renderer-accessibility and then try to spy, if not I think you'll have to reinstall chrome.

------------------------------
Gopal Bhaire
Analyst
Accenture
------------------------------

RE: Chrome 76 Update - BP no longer able to use HTML identification

AdamBelica1 — Fri, 09 Aug 2019 12:49:00 GMT

Hi,

I have the same problem.

@GopalBhaire, In Blue Prism version 6.4.0.8445 your approach does not work.

@Sebastian Bahri have you found a solution for your problem? Which BP version are you on?

------------------------------
Adam Belica
Software Engineer
EPAM Systems
Europe/Warsaw
------------------------------

RE: Chrome 76 Update - BP no longer able to use HTML identification

SebastianBahri — Fri, 09 Aug 2019 14:33:00 GMT

@Gopal Bhaire Thanks for your input
@Adam Belica I'm using BP 6.4.0.8445 and the Chrome extension is 1.0.0.X

We've been using Chrome with the chrome.exe --force-renderer-accessibility parameter, but this only enables UIA. Terminating and restarting Chrome processes doesn't help either.

It seems that BP 6.5 and the new extension 2.0.0.1 solve this problem, unfortunately we are going to transition to BP 6.5 later in September - so I tried installing only the newer Chrome extension 2.0.0.1 together with BP 6.4, unfortunately this didn't work as I hoped.

Any more suggestions on how Chrome 76 could work with BP 6.4?

------------------------------
Sebastian Bahri
Solutions Consultant
------------------------------

RE: Chrome 76 Update - BP no longer able to use HTML identification

AdamBelica1 — Mon, 12 Aug 2019 08:22:00 GMT

Hi @Sebastian Bahri,

It seems that 6.4 works with Chrome 76 but you need version 6.4.2.10610 (might be that versions newer to 6.4.0.8445 work as well, but I was able to test it only on 6.4.2.10610)

Bests,

------------------------------
Adam Belica
Software Engineer
EPAM Systems
Europe/Warsaw
------------------------------

RE: Chrome 76 Update - BP no longer able to use HTML identification

_Amlansahoo — Mon, 12 Aug 2019 10:34:00 GMT

Hi Folks,

According to Blue Prism you should use BP Version 6.4.2 for Chrom Version 72 and above.

PFB Link
https://portal.blueprism.com/customer-support/support-center#/path/Automation-Design/Application-Integration/Chrome/1303017642/Does-Blue-Prism-support-my-Google-Chrome-Browser-version.htm

I have used 6.4.2 so even after upgrade its working fine.

------------------------------
Amlan Sahoo
RPA Consultant
Equinix
------------------------------

RE: Chrome 76 Update - BP no longer able to use HTML identification

SathyaPandalai — Mon, 12 Aug 2019 12:47:00 GMT

I also faced the same issue few days ago. Most of our automation are on IE, but i wanted to test something out. What i found was that i was able to spy but when i tried to highlight, it failed.

Chrome version: Version 76.0.3809.100 (Official Build) (64-bit)
Blue Prism Version: 6.4.0.8445
Blue Prism Chrome Browser Extension: 1.0.6.3

UIA mode was working with force renderer tag

I then upgraded Blue Prism (isolated test environment) to 6.5.1.14401 and browser extension to 2.0.0.1 and looks like that fixed the issue. I am aware that it might not be possible to upgrade enterprise wise installations just like that, but please try it in an isolated environment to see if it works so that you can make plans for upgrade.

Hope this helps

------------------------------
Sathya Pandalai
RPA Architect
Edison, NJ
------------------------------

RE: Chrome 76 Update - BP no longer able to use HTML identification

RaivisLazdāns — Thu, 15 Aug 2019 08:49:00 GMT

Hi,

From where you can get extension v2.0.0.1? Seems that in Chrome store there is only v1.0.6.3?

------------------------------
Raivis LazdÄns
Process analyst/ RPA developer
SEB Latvia
Europe/Riga
------------------------------

RE: Chrome 76 Update - BP no longer able to use HTML identification

GopalBhaire — Thu, 15 Aug 2019 11:44:00 GMT

Extension gets updated when you update BP. You can manually install it from https://chrome.google.com/webstore/detail/blue-prism-browser-extens/nadpbbdaaifbaebnniobcfpiifbfokij

------------------------------
Gopal Bhaire
Analyst
Accenture
------------------------------

RE: Chrome 76 Update - BP no longer able to use HTML identification

SathyaPandalai — Thu, 15 Aug 2019 12:15:00 GMT

Hi Raivis,

I got the new chrome extension, when i upgraded from 6.4 to 6.5. If you are not seeing the latest extension in the store, the support team should be able to send you a link for the same. Please check with them.

Thank you

------------------------------
Sathya Pandalai
RPA Architect
Edison, NJ
------------------------------