topic Connecting Resource PC in Product Forum

Connecting Resource PC

MichaelMeier — Mon, 05 Mar 2018 14:39:00 GMT

Hello everyone, i am trying to connect two resource pcs to a BP Server. The BP Server service is running on machine A and i can connect to the BP Server service from machine A (in the Control Room i see the resource of machine A and it says me: Connection - Yes). Now i would like to conncet to the BP Server from another machine (machine B). When i specify the connection to machine A (via the ip adress) everything works fine and the connection is established and in the Control Room i see both machines. But: For the machine B it says: Connecteion - No, No such host is known. I logged in with the same user in both machines. If i log in with different users, the machine is sais: "Connection - No. Ressource private - owned by ...". How can i connect two machines that they are really connected in the Control Room? Where can i find documentations about how to set up an environment? Kind regards MM

That really is a networking…

Denis__Dennehy — Mon, 05 Mar 2018 17:06:00 GMT

That really is a networking question rather than anything else. Can you ping one machine from another, can you send telnet/http commands from one machine to another, is your firewall blocking communication, etc... This requires some basic networking problem solving.

Hi Denis, …

MichaelMeier — Mon, 05 Mar 2018 20:03:00 GMT

Hi Denis, yes it is a network problem. My ports are open and the firewall also should not be the problem. I can ping the computer. I realized i used the WCF: Insecure method because it was the only wy i could establish a connection. I am not familiar with WCF. How can i establish a connection via WCF? Kind regards

michaeljohannesmeier, I'm…

DmytroShpin — Wed, 28 Mar 2018 17:30:00 GMT

michaeljohannesmeier, I'm experiencing the same issue. I'm curious, have you solved it already? If so It'd be great to find out the solution. Many thanks.

I have the same problem

GuilhermeChainh — Thu, 09 May 2019 18:45:00 GMT

I have the same problem

Hi Michael, Could you pleaseâ€¦

EricLiu — Thu, 09 May 2019 21:25:00 GMT

Hi Michael, Could you please take some screen shots?Â The configuration of BP Client on machine A and machine B. Control room of machine A and machine B. You can launch Blue Prism from CMD. Normally it is C:\Program Files\Blue Prism Automation\automate.exe /resoucepc /public Check where your Blue Prism is installed and run the above command properly, hopefully it will solve your problem.

RE: Hi Michael, Could you pleaseâ€¦

NehaTapkir1 — Mon, 13 Apr 2020 12:49:00 GMT

I am facing the same issue. Is it resolved for any of you.

------------------------------
Neha Tapkir
------------------------------

RE: Hi Michael, Could you pleaseâ€¦

NehaTapkir1 — Mon, 13 Apr 2020 13:22:00 GMT

I added the resource pc's IP and its machine name entry in Host file on server machine and it worked. I think this error means it was not able to resolve the IP against the machine name and hence expects us to specify explicitly. 🙂 hope it works for you all also.

------------------------------
Neha Tapkir
------------------------------