topic Re: Field marked correctly but no value read in Product Forum

Field marked correctly but no value read

JakubLindner1 — Wed, 06 Sep 2023 13:51:47 GMT

Hi I am facing an issue when Decipher correctly marks the box around the field but the value read is null despite value being in the box.

I have tried enabling strict regex to no avail. Any advice?

Re: Field marked correctly but no value read

Tejaskumar_Darji — Fri, 08 Sep 2023 06:53:43 GMT

Can you add a snapshot or something to understand better, thanks.

Re: Field marked correctly but no value read

JakubLindner1 — Fri, 08 Sep 2023 07:04:02 GMT

@Tejaskumar_Darji Please see the example, Decipher finds the field but it's read as empty. When I correct the area manually it reads it correctly.

Re: Field marked correctly but no value read

Tejaskumar_Darji — Fri, 08 Sep 2023 07:06:55 GMT

Okay, I have seen this in very earlier versions long back not recently.

Maybe you can try to remove that field add a new field and retrain.

Re: Field marked correctly but no value read

JakubLindner1 — Fri, 08 Sep 2023 07:11:39 GMT

The version we are using is 2.23. I have tried with new model and it was still the same. I am trying this with FormFields=On; StrictPosition=On switches and strictregex to \d{2} and it still produces not adequate results

Re: Field marked correctly but no value read

Ben.Lyons1 — Fri, 08 Sep 2023 11:53:07 GMT

Hi Jakub,

Please can you share the full settings for that field, just to check if anything is contradicting itself?

Do you get the correct value when you hover your mouse over the auto-generated region? e.g.

Have you tried creating a brand new DFD, with 1 field and no other configuration. Upload the document to that and see if you can capture the field by selecting the auto-generated region?

Thanks

Ben

Re: Field marked correctly but no value read

JakubLindner1 — Fri, 08 Sep 2023 12:11:36 GMT

Hi Ben,

On hover it's also empty. The only way to get the data if it's not read (at rare occasions it reads fine) is to redraw the field.

Current settings I use are like below + misc options: FormFields=On, StrictPosition=On

Tried with new DFD and only these fields. No success - it did not select/highlight the fields at all.

Re: Field marked correctly but no value read

Ben.Lyons1 — Fri, 08 Sep 2023 12:24:29 GMT

Hi Jakub,

I'm not sure those settings are needed for this scenario, but I can't see that they would be causing this issue. Please can you raise a support ticket so that we can further assist you with this? Feel free to add to the ticket this was at my suggestion and if the respective engineer needs my support they can reach out.

Thanks

Ben

Re: Field marked correctly but no value read

douglas.h.burke — Fri, 16 Aug 2024 20:48:43 GMT

Was there a resolution found for this issue? I am having a similar issue and after two days to trying differentMisc settings in the DFD at a loss of what to try. If i resize the existing region during validation, the text is read fine. provided some screenshots to show this.

Re: Field marked correctly but no value read

jhoney12 — Thu, 22 Aug 2024 07:40:03 GMT

Given that resizing the field temporarily fixes the issue but doesn’t fully resolve it, it’s worth revisiting the field setup. Ensure there are no overlaps or conflicts with other fields and that the field parameters are set consistently. For a deeper dive, TraceShipments can help track the data extraction process and pinpoint any issues. This insight can guide further adjustments to your field settings or document setup.