https://community.blueprism.com/t5/Product-Forum/Speed-from-Control-Room/m-p/49568#M4953 Control Room is the normal speed of execution. Studio is artificially slower because the diagram needs to be rendered on screen, the current step highlighted in orange and the 'ticker tape' log trace written to the status bar. The only way to approach CR speed in the Studio is to use the Step out function, but apart from that CR will always be quicker. A machine with a lesser specification or poorer network connectivity will probably run slower. Thu, 01 Mar 2018 14:16:00 GMT John__Carter 2018-03-01T14:16:00Z https://community.blueprism.com/t5/Product-Forum/Speed-from-Control-Room/m-p/49567#M4952 Hi- I ran the bot from Process and then from Control Room.It is taking the same amount of time from both. but from control room, it should run faster than process. Am i missing something? Thu, 01 Mar 2018 12:53:00 GMT https://community.blueprism.com/t5/Product-Forum/Speed-from-Control-Room/m-p/49567#M4952 Neel1 2018-03-01T12:53:00Z https://community.blueprism.com/t5/Product-Forum/Speed-from-Control-Room/m-p/49568#M4953 Control Room is the normal speed of execution. Studio is artificially slower because the diagram needs to be rendered on screen, the current step highlighted in orange and the 'ticker tape' log trace written to the status bar. The only way to approach CR speed in the Studio is to use the Step out function, but apart from that CR will always be quicker. A machine with a lesser specification or poorer network connectivity will probably run slower. Thu, 01 Mar 2018 14:16:00 GMT https://community.blueprism.com/t5/Product-Forum/Speed-from-Control-Room/m-p/49568#M4953 John__Carter 2018-03-01T14:16:00Z