Blue Prism Product

Hi All,

It's not a question but rather a discussion that i want to have with you.

In best practice we saw that for pop up windows like restore page or translate page, we have to create a seperate VBO (windows application) to handle it.

But what if the pop up didnot appear ?

So for example when i make a kill process for chrome and i restart again, sometimes i dont have the translate pop up see below :

So what i did, in my VBO i make it like that : 

In fact if i put a system exception in the wait for Translate pop up sometimes i had an error (because the pop up not exist). Even for attach i had the AMI error.

So i put an end stage, and it work very well.

But i need your opinion if you can help me and give me a cleaner solution :).

Thanks

Hi @Mohamad DAKKOURI,

Did you spy this element using UIA? I have had to spy a window like this before only for it to change on a browser update. I would suggest adding this command parameter --hide-crash-restore-bubble to your application modeler to hide the Restore Session popup window. For the language translation, you can add the following parameter, --disable-features=Translate.

Cheers,

Hi All,

It's not a question but rather a discussion that i want to have with you.

In best practice we saw that for pop up windows like restore page or translate page, we have to create a seperate VBO (windows application) to handle it.

But what if the pop up didnot appear ?

So for example when i make a kill process for chrome and i restart again, sometimes i dont have the translate pop up see below :

So what i did, in my VBO i make it like that : 

In fact if i put a system exception in the wait for Translate pop up sometimes i had an error (because the pop up not exist). Even for attach i had the AMI error.

So i put an end stage, and it work very well.

But i need your opinion if you can help me and give me a cleaner solution :).

Thanks

Hi Chistopher Potvin,

Is it  possible to add two commands at the same time  for both restore/popup(-hide-crash-restore-bubble) as well as language translation(--disable-features=Translate)?

-hide-crash-restore-bubble --disable-features=Translate

Hi @Mohamad DAKKOURI,

Did you spy this element using UIA? I have had to spy a window like this before only for it to change on a browser update. I would suggest adding this command parameter --hide-crash-restore-bubble to your application modeler to hide the Restore Session popup window. For the language translation, you can add the following parameter, --disable-features=Translate.

Cheers,

Hi All,

It's not a question but rather a discussion that i want to have with you.

In best practice we saw that for pop up windows like restore page or translate page, we have to create a seperate VBO (windows application) to handle it.

But what if the pop up didnot appear ?

So for example when i make a kill process for chrome and i restart again, sometimes i dont have the translate pop up see below :

So what i did, in my VBO i make it like that : 

In fact if i put a system exception in the wait for Translate pop up sometimes i had an error (because the pop up not exist). Even for attach i had the AMI error.

So i put an end stage, and it work very well.

But i need your opinion if you can help me and give me a cleaner solution :).

Thanks

Hi @Harish Mogulluri,

You can add as many parameters as you like. Another parameter that might be helpful for you in the future is the --start-maximized  this will start the browser in a maximized window. 

Thanks!

Hi Chistopher Potvin,

Is it  possible to add two commands at the same time  for both restore/popup(-hide-crash-restore-bubble) as well as language translation(--disable-features=Translate)?

-hide-crash-restore-bubble --disable-features=Translate

Hi @Mohamad DAKKOURI,

Did you spy this element using UIA? I have had to spy a window like this before only for it to change on a browser update. I would suggest adding this command parameter --hide-crash-restore-bubble to your application modeler to hide the Restore Session popup window. For the language translation, you can add the following parameter, --disable-features=Translate.

Cheers,

Hi All,

It's not a question but rather a discussion that i want to have with you.

In best practice we saw that for pop up windows like restore page or translate page, we have to create a seperate VBO (windows application) to handle it.

But what if the pop up didnot appear ?

So for example when i make a kill process for chrome and i restart again, sometimes i dont have the translate pop up see below :

So what i did, in my VBO i make it like that : 

In fact if i put a system exception in the wait for Translate pop up sometimes i had an error (because the pop up not exist). Even for attach i had the AMI error.

So i put an end stage, and it work very well.

But i need your opinion if you can help me and give me a cleaner solution :).

Thanks

Hi @Harish Mogulluri,

You can add as many parameters as you like. Another parameter that might be helpful for you in the future is the --start-maximized  this will start the browser in a maximized window. 

Thanks!

Hi Chistopher Potvin,

Is it  possible to add two commands at the same time  for both restore/popup(-hide-crash-restore-bubble) as well as language translation(--disable-features=Translate)?

-hide-crash-restore-bubble --disable-features=Translate

Hi @Mohamad DAKKOURI,

Did you spy this element using UIA? I have had to spy a window like this before only for it to change on a browser update. I would suggest adding this command parameter --hide-crash-restore-bubble to your application modeler to hide the Restore Session popup window. For the language translation, you can add the following parameter, --disable-features=Translate.

Cheers,

Hi All,

It's not a question but rather a discussion that i want to have with you.

In best practice we saw that for pop up windows like restore page or translate page, we have to create a seperate VBO (windows application) to handle it.

But what if the pop up didnot appear ?

So for example when i make a kill process for chrome and i restart again, sometimes i dont have the translate pop up see below :

So what i did, in my VBO i make it like that : 

In fact if i put a system exception in the wait for Translate pop up sometimes i had an error (because the pop up not exist). Even for attach i had the AMI error.

So i put an end stage, and it work very well.

But i need your opinion if you can help me and give me a cleaner solution :).

Thanks

Dear Christopher

Thank you for your answer.

But suppose its not this pop up, its another pop up like for example save as or something else.

How can we create a Vbo that work without error (not connected) even if we dont have the pop up.

Like i do even if its work, i find its not a clean way.

I dont know if i am clear but dont hesitate to ask me if its not clear.

Hi @Harish Mogulluri,

You can add as many parameters as you like. Another parameter that might be helpful for you in the future is the --start-maximized  this will start the browser in a maximized window. 

Thanks!

Hi Chistopher Potvin,

Is it  possible to add two commands at the same time  for both restore/popup(-hide-crash-restore-bubble) as well as language translation(--disable-features=Translate)?

-hide-crash-restore-bubble --disable-features=Translate

Hi @Mohamad DAKKOURI,

Did you spy this element using UIA? I have had to spy a window like this before only for it to change on a browser update. I would suggest adding this command parameter --hide-crash-restore-bubble to your application modeler to hide the Restore Session popup window. For the language translation, you can add the following parameter, --disable-features=Translate.

Cheers,

Hi All,

It's not a question but rather a discussion that i want to have with you.

In best practice we saw that for pop up windows like restore page or translate page, we have to create a seperate VBO (windows application) to handle it.

But what if the pop up didnot appear ?

So for example when i make a kill process for chrome and i restart again, sometimes i dont have the translate pop up see below :

So what i did, in my VBO i make it like that : 

In fact if i put a system exception in the wait for Translate pop up sometimes i had an error (because the pop up not exist). Even for attach i had the AMI error.

So i put an end stage, and it work very well.

But i need your opinion if you can help me and give me a cleaner solution :).

Thanks