cancel
Showing results for 
Search instead for 
Did you mean: 

Capture Model not Training

bbobo
Level 5
I can't seem to get this capture model to train. I've adjusted the numbers and selected Mark for training but nothing seems to happen and the 'last trained' field stays as 'N/A'. ML was enabled in the setup. 

34894.png
1 BEST ANSWER

Helpful Answers

Ben.Lyons1
Staff
Staff
Hi Ben,

That's maybe a little strange (or a coincidence), but it can take a little while for a capture model to be created.

If you have access, you can check the capture model table in the database. The status column is either 1 or 2, 1 = unlocked, 2 = locked for training.

If it happens again, it's worth checking and if the status is 1, it would be worth raising a support ticket.

Thanks

Ben
Ben Lyons
Principal Product Specialist - Decipher
SS&C Blue Prism
UK based

View answer in original post

6 REPLIES 6

Ben.Lyons1
Staff
Staff
Hi Ben B,

Have you carried out the steps described in this link?

Thanks

Ben L
Ben Lyons
Principal Product Specialist - Decipher
SS&C Blue Prism
UK based

bbobo
Level 5
Hi Ben,

Yes I enabled ML during setup of Decipher.

I deselected the ML from the Doc Type and then re-added it and it eventually showed a 'Last Trained' date. Not sure if that was a coincidence or not but that happened hours after it passed the periodic training mark.

Ben.Lyons1
Staff
Staff
Hi Ben,

That's maybe a little strange (or a coincidence), but it can take a little while for a capture model to be created.

If you have access, you can check the capture model table in the database. The status column is either 1 or 2, 1 = unlocked, 2 = locked for training.

If it happens again, it's worth checking and if the status is 1, it would be worth raising a support ticket.

Thanks

Ben
Ben Lyons
Principal Product Specialist - Decipher
SS&C Blue Prism
UK based

bbobo
Level 5
Thanks Ben. The database flags are very useful to know, I will check those if it happens again. Thank you!

bbobo
Level 5
Hi Ben - I am running into this issue again. When you select "mark for training" - should that lock the capture model right away or is there a delay? The state in the database is still "1" even though "marked for training" is selected.

Ben.Lyons1
Staff
Staff
Hi Ben,

It should be more or less straight away.

Please can you raise this as a support ticket? Mention that you've discussed it with me and I can discuss it with the respective support agent.

Thanks

Ben
Ben Lyons
Principal Product Specialist - Decipher
SS&C Blue Prism
UK based