Hi, we would like to have a search bar on the Control page similar to the one on the Studio page. This will make it easier and less frustrating to find a schedule. Is it possible for you to implement this change for us?
... View more
Status:
Under Consideration
Submitted on
25-08-21
10:31 AM
Submitted by
toms1985
on
25-08-21
10:31 AM
Currently, during designing Interact forms we could choose one field as Key Value, which is displayed in general Submissions tables (as Submission History), without viewing submission details. But we couldn't modify Key Value during BP process. It would be very helpful, if we could assign some field (or fields) during form designing to be displayed in general Submissions tables (as Key value) and could be modify during BP process from BP action "Edit Form Field". It could be use e.g. for updating current status of BP process, easily visible, without going into sumbmission's detail.
... View more
Good Day, BP Interact could benefit from the following change:
Synchronization of AD group membership into Interact Database is 100% manual and Synchronization can not be scheduled - If you add a person to a group that person isn't loaded into Interact until you manually synchronize the people.
... View more
In our Decipher implementation, we have different use cases - some of these need class verification enabled and some do not. Currently, enabling/ disabling class verification will allow/ skip class verify for all of the batch types. Please enable new setting in batch type settings as Automatically skip Class Verify”.
... View more
Good Day, BP Interact could benefit from the following change:
Limit of 10,000 users - AHS has 180,000 active users. We don't need to ingest them all, but would like to ingest more than 10,000 users.
... View more
This is functionality that exists in Legacy Processor workspace and would be very helpful to add to Modern Processor workspace. Currently, all columns in the history have the same width and the width cannot be adjusted. This is a challenge because the Comments column can have lengthy test, which is very hard to read if only a couple words can fit on each line. We should be able to adjust the column width and the system to remember preferred column width. Also, the Comments column should default to being wider than the other columns.
... View more
Status:
Under Consideration
Submitted on
06-01-21
03:41 PM
Submitted by
HarshitRawat
on
06-01-21
03:41 PM
Comparing version history feature( System> History> Compare selected process/object) is helpful to see the changes side by side but it doesnt't show changes made in Application Modeller in an object . If i change some elements in App Modeller in an object and save it , and then try to compare this with a version previous the Version no changes would be shown in both objects
... View more
Status:
Under Consideration
Submitted on
18-05-21
10:31 AM
Submitted by
AmbrogioCrivell
on
18-05-21
10:31 AM
After submitted a Interact Request, an automatic email is send with complete information of submitted request. It would to be great have the ability to edit this email with some different contents, some text, images ... Thanks!
... View more
Create the Session Log Viewer as a normal window with maximize minimize functions I cant' even use the windows 10 feate to automatically dock it to a side. Would also be great to save width of coloumns or save the coloumns selection. when I enable or disable a coloumn. It would also be great to have these coloumn functions when in the workqueue overview.
... View more
We need to be able to normally delete (NOT hide, retire or sth like that, but to delete) old business objects and processes without corrupting database
... View more
Status:
Under Consideration
Submitted on
16-02-22
04:25 PM
Submitted by
NileshJadhavBP
on
16-02-22
04:25 PM
Can we add some functionality which will notify the developer or controller team when resource pc is getting shutdown or hanged or crash. It will increase our bot utilization time and experience of user. Please let me know if you need more details from my end. Thanks Nilesh
... View more
Status:
Under Consideration
Submitted on
13-08-21
01:35 PM
Submitted by
CKOMORO
on
13-08-21
01:35 PM
Hello, if a Case terminated you can right mouse click and you have just two options. Show logs and Show process. An additonal Option like ReRun would be nice. At the moment you have to drag and drop on the specific client or you click on the schedule and press Run now but if you using startparameters you have to enter all parameters again. A ReRun with same StartParameters would be great and save time.
... View more
Status:
Under Consideration
Submitted on
16-01-20
06:38 PM
Submitted by
AdamGaulding
on
16-01-20
06:38 PM
It would be very helpful to be able to test or call the web services being developed from the Web API pop-up instead of making and saving changes and having to go back to an object to test.
... View more
Good Day, BP Interact could benefit from the following change:
Users need to be assigned to roles manually - Users need to be manually assigned to each role (which has access to a group of forms)
... View more
When logging in to Hub using SSO, the login screen is displayed even though ID/Pass is not required. End users have said that it is a small thing, but if they use it frequently, unnecessary screen transitions can be stressful. Could you please consider changing the specification so that it transitions directly to the Hub/Interct selection screen instead of the login screen? ----------------------------- SSOを使用してHubにログインする際に、ID/Passの入力は不要なのにもかかわらず、ログイン画面が表示されます。 エンドユーザより、ちょっとしたことだが頻繁に使用していると無駄な画面遷移がストレスに感じられるという声がありました。 ログイン画面ではなくダイレクトにHub/Interctの選択画面に遷移するよう、仕様の変更を検討いただけないでしょうか。
... View more
The AutomateC.exe utility in the current iteration can fetch just the plain log lines from the Blue Prism logs using the /getlog switch. The following images shows the difference between what is visible in the Log Viewer for a target session vs. what is actually returned when the AutomateC.exe /getlog command is executed on the same session. As seen below , the log info returned via AutomateC.exe does not contain the information from the Parameters column that is normally visible in the Log Viewer. Purpose for this Request: We have a practical need where we have to execute a series of processes that are pre-configured in a configuration source. The number and order of the processes will vary with the type of Business process that is being currently executed via Blue Prism. In Blue Prism there is currently no way to dynamically call a Process at runtime by passing the process name as a parameter. The AutomateC.exe is the only avenue using which processes can be called by generating command lines at runtime by passing in the name of the process and their input parameters. Most importantly, if we can pass in input parameters to a process that is being executed via AutomateC.exe, it is only natural that this utility be versatile enough that it is able to return the output parameters returned by a process that has executed in a specific session. Thank you! -Andy Menon
... View more
Work items which are stuck in infinite loops impact Chorus BPM system performance, and in some cases system stability. This issue impacts both hosted and self-hosted clients. When we see high CPU utilisation on the application and database servers, we query the WA2 BI event table to find work items which are stuck in a loop. This reactive step allows us to identify the work items which are impacting performance but doesn't address the root cause. We could like Chorus BPM design studio to identify potential infinite loops as part of process validation. The beta process test automation framework was able to identify loops. Maybe this code could be used as the basis of a solution?
... View more
There is no option to view all the values of an item in the Queue Contents view.
Currently you can only see the item key.
To be able to analyse the contents of an item, I must start a process and call "Get Next Item".
It would be helpful to place a button next to or in the Item Key column that allows you to see the content of the respective item.
A list view would be good too, so that you have an overview of all items with the associated item values.
Viewing the item's values should be restricted by access rights, as items may contain information that should not be accessible to everyone.
... View more
Rather than have a process on a schedule set to periodically check a queue for data to work, add an optional work queue setting to automatically kick off a process on a designated resource/pool once there are items to be worked. This would remove the need for 24/7 monitoring processes which may quickly fill the various log tables, while lowering the traffic throughput to the controller/database. Work queues can be populated by new and/or existing feeder processes.
... View more
Status:
Delivered
Submitted on
10-01-20
01:18 PM
Submitted by
KristianRisager
on
10-01-20
01:18 PM
BP currently lacks the ability to edit expressions in the Evaluate Expression wizard. This leads to clicking back and forth a lot, and it is time consuming when testing different variable values. Can you make it possible to edit expressions and evaluate them in the same window?
... View more
